عن

تعرف على ما يميز هذا المنتج ولماذا هو مناسب لك.

Port	Connector Type	Description	Available Components
2.5GE/PoE_IN	RJ45	100M/1000M/2.5G auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input.	Network cable
GE0	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
GE1	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
GE2	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
GE3	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
DC 12V	DC connector	Connects to a 12 V power adapter.	12 V DC power adapter
USB	USB Type A	Provides 2.5 W or 5 W power supply.	-
PASS-THRU	RJ45	A pair of RJ45 passthrough ports for transparent transmission and interconnection with Ethernet cables or telephone lines.	Network cable or telephone line
Management console port	Pin row	Management console port, allowing operations only by professionals	-

Indicators and Buttons

Figure 5-3 Indicators and buttons on the AP271E
Click to enlarge

The indicator is located inside the panel, which turns on after the AP is powered on.

Indicator

Default

Table 5-3 Indicators on the AP271E

Silkscreen	Name	Color	Status	Description
-	System indicator	-	Off	The system is not running.
		Green	Steady on	The system is just powered on. The system is starting after a reset. The upper-layer system is starting.
		Green	Steady on after blinking once	After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the system starts.
		Green	Slow blinking (0.5 Hz)	The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
		Green	Slow blinking (0.2 Hz)	The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
		Green	Blinking once every 0.25s (4 Hz)	The AP works in Fat or Fit mode. The software is being upgraded. In Fit mode, the AP is requesting to go online or fails to go online.
		Blue	Slow blinking (0.5 Hz)	The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
		Blue	Blinking once every 0.25s (4 Hz)	The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
		Yellow (blinking red and green at the same time, causing color deviation)	Blinking once every 0.25s (4 Hz)	Hold down the Default button for more than 6 seconds to restore the factory settings. This function is supported in V600R024C10.
		Red	Blinking once every 0.25s (4 Hz)	Hold down the Default button for more than 6 seconds to restore the factory settings. This function is supported in V600R25C00 or later.
		Red	Steady on	The system is faulty.

Table 5-4 Buttons on the AP271E

Silkscreen	Name	Description
Default	Reset button	For V600R024C10: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow fast (blinking red and green at the same time, causing color deviation), at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts. For V600R025C00 and later versions: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks red fast, at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts.

Technical Specifications

Table 5-5 Technical specifications of the AP271E

Item	Specification
Installation Type	Wall Ceiling Junction Box (86 mm/1-Gang 120 mm/Octagonal)
Dimensions without packaging (H x W x D) [mm(in.)]	175 mm x 86 mm x 45 mm (6.89 in. x 3.39 in. x 1.77 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	72 mm x 245 mm x 118 mm (2.83 in. x 9.65 in. x 4.65 in.)
Weight without packaging [kg(lb)]	0.405 kg (0.89 lb)
Weight with packaging [kg(lb)]	0.65 kg (1.43 lb)
Storage	NAND Flash 256 MB
Console port	None
Maximum power consumption [W]	13.2 (excluding USB)
Maximum heat dissipation [BTU/hour]	42.8 BTU/hour
Power supply mode	PoE DC power adapter
Rated input voltage [V]	DC: 12 V PoE: 802.3at/af
Input voltage range [V]	DC: 12 V ± 10% PoE: 802.3at/af
Service port surge protection	PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
PoE OUT	Not supported
Maximum number of physical ports on the entire device	GE (RJ45) x 4, 10M/100M/1000M auto-sensing 2.5GE (RJ45) x 1, 100M/1000M/2500M auto-sensing PASS-THRU (RJ45) x 2
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]	53kPa - 106kPa ETSI 300 019-2-3
Ground	Floating ground
USB	USB 2.0, power supply: 2.5 W/5 W
IoT slot	Not supported
BLE	Not supported
Radio number	2
Operating frequency band	2.4GHz 5GHz
MIMO spatial streams	Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2
Wi-Fi standard	2.4 GHz: 802.11b/g/n/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be
Radio interface	Built-in smart antennas
Antenna gain	2.4 GHz: 5 dBi/chain (peak gain) 3 dBi (combined gain) 5 GHz: 5 dBi/chain (peak gain) 3 dBi (combined gain)
Maximum transmit power	2.4 GHz: 20 dBm/chain 23 dBm (combined power) 5 GHz: 20 dBm/chain 23 dBm (combined power)
Single radio transmit power [dBm]	2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain
MTBF [year]	157.6381617 year
MTTR [hour]	2 hour
Frequency stability [ppm]	+/-20
802.3bt power supply description	The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3at power supply description	The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3af power supply description	When the power supply mode is negotiated to 802.3af, the USB power supply is not supported and other functions are not restricted.
DC power supply description	No function is limited.

تعرف على ما يميز هذا المنتج ولماذا هو مناسب لك.

Port	Connector Type	Description	Available Components
2.5GE/PoE_IN	RJ45	100M/1000M/2.5G auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input.	Network cable
GE0	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
GE1	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
GE2	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
GE3	RJ45	Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.	Network cable
DC 12V	DC connector	Connects to a 12 V power adapter.	12 V DC power adapter
USB	USB Type A	Provides 2.5 W or 5 W power supply.	-
PASS-THRU	RJ45	A pair of RJ45 passthrough ports for transparent transmission and interconnection with Ethernet cables or telephone lines.	Network cable or telephone line
Management console port	Pin row	Management console port, allowing operations only by professionals	-

Indicators and Buttons

Figure 5-3 Indicators and buttons on the AP271E
Click to enlarge

The indicator is located inside the panel, which turns on after the AP is powered on.

Indicator

Default

Table 5-3 Indicators on the AP271E

Silkscreen	Name	Color	Status	Description
-	System indicator	-	Off	The system is not running.
		Green	Steady on	The system is just powered on. The system is starting after a reset. The upper-layer system is starting.
		Green	Steady on after blinking once	After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the system starts.
		Green	Slow blinking (0.5 Hz)	The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
		Green	Slow blinking (0.2 Hz)	The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
		Green	Blinking once every 0.25s (4 Hz)	The AP works in Fat or Fit mode. The software is being upgraded. In Fit mode, the AP is requesting to go online or fails to go online.
		Blue	Slow blinking (0.5 Hz)	The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
		Blue	Blinking once every 0.25s (4 Hz)	The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
		Yellow (blinking red and green at the same time, causing color deviation)	Blinking once every 0.25s (4 Hz)	Hold down the Default button for more than 6 seconds to restore the factory settings. This function is supported in V600R024C10.
		Red	Blinking once every 0.25s (4 Hz)	Hold down the Default button for more than 6 seconds to restore the factory settings. This function is supported in V600R25C00 or later.
		Red	Steady on	The system is faulty.

Table 5-4 Buttons on the AP271E

Silkscreen	Name	Description
Default	Reset button	For V600R024C10: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow fast (blinking red and green at the same time, causing color deviation), at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts. For V600R025C00 and later versions: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks red fast, at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts.

Technical Specifications

Table 5-5 Technical specifications of the AP271E

Item	Specification
Installation Type	Wall Ceiling Junction Box (86 mm/1-Gang 120 mm/Octagonal)
Dimensions without packaging (H x W x D) [mm(in.)]	175 mm x 86 mm x 45 mm (6.89 in. x 3.39 in. x 1.77 in.)
Dimensions with packaging (H x W x D) [mm(in.)]	72 mm x 245 mm x 118 mm (2.83 in. x 9.65 in. x 4.65 in.)
Weight without packaging [kg(lb)]	0.405 kg (0.89 lb)
Weight with packaging [kg(lb)]	0.65 kg (1.43 lb)
Storage	NAND Flash 256 MB
Console port	None
Maximum power consumption [W]	13.2 (excluding USB)
Maximum heat dissipation [BTU/hour]	42.8 BTU/hour
Power supply mode	PoE DC power adapter
Rated input voltage [V]	DC: 12 V PoE: 802.3at/af
Input voltage range [V]	DC: 12 V ± 10% PoE: 802.3at/af
Service port surge protection	PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
PoE OUT	Not supported
Maximum number of physical ports on the entire device	GE (RJ45) x 4, 10M/100M/1000M auto-sensing 2.5GE (RJ45) x 1, 100M/1000M/2500M auto-sensing PASS-THRU (RJ45) x 2
Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH]	5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa]	53kPa - 106kPa ETSI 300 019-2-3
Ground	Floating ground
USB	USB 2.0, power supply: 2.5 W/5 W
IoT slot	Not supported
BLE	Not supported
Radio number	2
Operating frequency band	2.4GHz 5GHz
MIMO spatial streams	Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2
Wi-Fi standard	2.4 GHz: 802.11b/g/n/ax/be 5 GHz: 802.11a/n/ac/ac Wave 2/ax/be
Radio interface	Built-in smart antennas
Antenna gain	2.4 GHz: 5 dBi/chain (peak gain) 3 dBi (combined gain) 5 GHz: 5 dBi/chain (peak gain) 3 dBi (combined gain)
Maximum transmit power	2.4 GHz: 20 dBm/chain 23 dBm (combined power) 5 GHz: 20 dBm/chain 23 dBm (combined power)
Single radio transmit power [dBm]	2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain
MTBF [year]	157.6381617 year
MTTR [hour]	2 hour
Frequency stability [ppm]	+/-20
802.3bt power supply description	The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3at power supply description	The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3af power supply description	When the power supply mode is negotiated to 802.3af, the USB power supply is not supported and other functions are not restricted.
DC power supply description	No function is limited.

Huawei بواسطة Huawei

AP271E

السعر العادي: $110.00
سعر البيع: $110.00
السعر العادي

يتم احتساب تكلفة الشحن عند إتمام عملية الشراء.

إنتهى من المخزن

تفاصيل أساسية حول ميزات المنتج وكيفية استخدامه.

أنواع المنتجات:

ملاحظة المنتج

يرجى التحقق من مواصفات المنتج (الحجم والتوافق والطراز) بعناية قبل الشراء.

اطلع على هذه المنتجات ذات الصلة

كيفية

إتش بي: تعزيز الإنتاجية والابتكار في جميع أنحاء العالم

متجر أورو: وجهتك الموثوقة للتكنولوجيا والإلكترونيات

عن

Indicators and Buttons

Technical Specifications

Indicators and Buttons

Technical Specifications

AP271E

اطلع على هذه المنتجات ذات الصلة

أحدث المقالات

إتش بي: تعزيز الإنتاجية والابتكار في جميع أنحاء العالم

متجر أورو: وجهتك الموثوقة للتكنولوجيا والإلكترونيات

معلومات عنا

فئات

روابط سريعة

عربة التسوق

Subtotal: