عن
تعرف على ما يميز هذا المنتج ولماذا هو مناسب لك.
| Item | Details |
|---|---|
| Description | S210I-8P4SX (8*10/100/1000BASE-T ports, 2*GE SFP ports, 2*10GE SFP+ ports, PoE+, DIN Rail Mounting, Dual redundant 48 to 57V DC supply, Fanless, Without power module) |
| Part Number | 98012933 |
| Model | S210I-8P4SX |
| First supported version | V600R024C10SPC600 |
Components
Figure 4-55 S210I-8P4SX appearance
|
1 |
One DI port
NOTE:
It must be used with 1x5-Pin Phoenix Connector, which is included in the auxiliary material package delivered with the device. |
2 |
One DO port
NOTE:
It must be used with 1x5-Pin Phoenix Connector, which is included in the auxiliary material package delivered with the device. |
|
3 |
Two DC power input ports
NOTE:
The following external power module can be configured: |
4 |
PoE DIP switch
NOTICE:
|
|
5 |
Ground screw
NOTE:
It is used with a ground cable. |
6 |
One RST button
NOTICE:
|
|
7 |
Eight 10/100/1000BASE-T PoE+ ports |
8 |
Two 100/1000BASE-X ports |
|
9 |
Two 10GE SFP+ ports |
- |
- |
Ports
Figure 4-56 Typical connections of the DI port
Figure 4-57 Typical connections of the DO port
Table 4-141 Ports on the S210I-8P4SX
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | |
| 1000BASE-X port | SFP | A 1000BASE-X port can send and receive data at 1000 Mbit/s or 100 Mbit/s. | |
| 10GE SFP+ optical port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. | |
| DI port | 1x5-Pin Phoenix Connector |
The DI port is used to check active level signals. Signal type: 9.6 V to 60 V for state 1; –30 V to +3 V for state 0 |
|
| DO port | 1x5-Pin Phoenix Connector |
The DO port outputs signals so that the connected device can take corresponding actions. Signal type: Passive DO signals, Boolean value (short circuit and open circuit) |
Indicators and Buttons
Figure 4-58 Indicators on the device
Table 4-142 Description of indicators on the device
|
No. |
Indicator |
Name |
Color |
Status |
Description |
|---|---|---|---|---|---|
|
1 |
PWR1 |
Indicator of power module 1 |
- |
Steady off |
Power module 1 is not supplying power or is abnormal. |
|
Green |
Steady on |
Power module 1 supplies power properly. |
|||
|
2
|
PWR2
|
Indicator of power module 2 |
- |
Steady off |
Power module 2 is not supplying power or is abnormal. |
|
Green |
Steady on |
Power module 2 supplies power properly. |
|||
|
3 |
SYS |
System status indicator |
- |
Off |
The system is not running. |
|
Green |
Fast blinking |
The system is starting. |
|||
|
Green |
Steady on |
During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds. |
|||
|
Green |
Slow blinking |
The system is running normally. |
|||
|
4 |
ALM |
Alarm indicator |
Red |
Steady on |
The system is faulty or a temperature alarm has been generated. |
|
- |
Steady off |
The system is normal. |
|||
|
5 |
1 to 8 |
Electrical port indicator (one indicator for each port) |
Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top. |
Meanings of service port indicators vary in different modes. For details, see Table 4-143. |
|
|
6 |
9 and 10 1 and 2 |
Optical port indicator (one indicator for each port) |
- |
||
|
7 |
CLOUD |
Cloud indicator |
- |
Off |
The device is not connected to the cloud. |
|
Blue |
Fast blinking |
The device is connecting to the cloud. |
|||
|
Blue |
Slow blinking |
The device is in the cloud management state. |
|||
Table 4-143 Description of service port indicators in different modes (one indicator for each port)
|
Display Mode |
Color |
Status |
Description |
|---|---|---|---|
|
Default mode |
- |
Steady off |
The port is not connected or has been shut down. |
|
Green |
Steady on |
A link has been established on the port. |
|
|
Green |
Blinking |
The port is sending or receiving data. |
|
|
PoE connection status indicator mode
NOTE:
You need to set DIP switch 2 to ON. In this case, the device works in PoE mode, and the service port indicators show the PoE status of each port. |
- |
Steady off |
The port is not providing power to a powered device (PD). |
|
Green |
Steady on |
The port is providing power to a PD. |
|
|
Green |
Blinking |
The PD connected to the port is not an IEEE-compliant PD or its power exceeds the maximum power or power threshold of the port. |
Power Supply System
The device can use a single power module or dual power modules for 1+1 power redundancy. It can be connected to a PAC240S56-CN power module.
Table 4-144 Power supply configurations
|
Power Module 1 |
Power Module 2 |
Available PoE Power |
Maximum Number of Ports (Fully Loaded) |
|---|---|---|---|
|
PAC240S56-CN |
- |
210 W |
|
|
PAC240S56-CN |
PAC240S56-CN |
240 W |
|
- The PoE power supply of the device is in direct mode. The input voltage must meet the PoE standard. If the input voltage does not meet the PoE standard, the voltage on the PD side may be too low.
- If the PAC240S56-CN is used, one PAC240S56-CN can supply power to only one S210I-8P4SX at a time.
Heat Dissipation System
The device has no fans and uses natural heat dissipation.
Technical Specifications
Table 4-145 Technical specifications of the S210I-8P4SX
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] |
Basic dimensions (excluding the parts protruding from the body): 150.0 mm x 44.0 mm x 133.0 mm (5.91 in. x 1.73 in. x 5.24 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 162.0 mm x 44.0 mm x 142.0 mm (6.38 in. x 1.73 in. x 5.59 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 113.0 mm x 235.0 mm x 188.0 mm (4.45 in. x 9.25 in. x 7.40 in.) |
| Chassis height [U] | 3.65 U |
| Chassis material | Metal |
| Weight without packaging [kg(lb)] | 0.986 kg (2.17 lb) |
| Weight with packaging [kg(lb)] | 1.35 kg (2.98 lb) |
| Typical power consumption [W] | 15.56 W |
| Typical heat dissipation [BTU/hour] | 53.09 BTU/hour |
| Maximum power consumption [W] |
|
| Maximum heat dissipation [BTU/hour] |
|
| Static power consumption [W] | 9.52 W |
| MTBF [years] | 133.599 years |
| Availability | > 0.99999 |
| Noise at normal temperature (acoustic power) [dB(A)] | Noise-free (no fans) |
| Noise at normal temperature (acoustic pressure) [dB(A)] | Noise-free (no fans) |
| Number of card slots | 0 |
| Number of power slots | 0 |
| Number of fans modules | 0 |
| Redundant power supply | 1+1 |
| Long-term operating temperature [°C(°F)] |
0–1800 m (0–5906 ft.) altitude, industrial optical modules:
|
| Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature [°C(°F)] | -40°C to +85°C (-40°F to +185°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | 0–5000 m (0–16404 ft.) |
| Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
| Power supply mode | DC external |
| Rated input voltage [V] | DC input: 56 V DC |
| Input voltage range [V] |
DC input: 54 V DC to 57 V DC (PoE/PoE+) 48 V DC (PoE) |
| Maximum input current [A] | 5.6 A |
| Flash memory | Physical space: 16 MB |
| Eth Management port | Not supported |
| USB | Not supported |
| RTC | Not supported |
| RPS input | Not supported |
| Service port surge protection [kV] | Common mode: ±6 kV |
| Power supply surge protection [kV] | DC power: ±2 kV in common mode and ±1 kV in differential mode |
| Ingress protection level (dustproof/waterproof) | IP40 |
| Types of fans | None |
| Heat dissipation mode | Natural heat dissipation |
| Airflow direction | - |
| PoE | Supported |
| Certification |
EMC certification Safety certification Manufacturing certification |
تعرف على ما يميز هذا المنتج ولماذا هو مناسب لك.
| Item | Details |
|---|---|
| Description | S210I-8P4SX (8*10/100/1000BASE-T ports, 2*GE SFP ports, 2*10GE SFP+ ports, PoE+, DIN Rail Mounting, Dual redundant 48 to 57V DC supply, Fanless, Without power module) |
| Part Number | 98012933 |
| Model | S210I-8P4SX |
| First supported version | V600R024C10SPC600 |
Components
Figure 4-55 S210I-8P4SX appearance
|
1 |
One DI port
NOTE:
It must be used with 1x5-Pin Phoenix Connector, which is included in the auxiliary material package delivered with the device. |
2 |
One DO port
NOTE:
It must be used with 1x5-Pin Phoenix Connector, which is included in the auxiliary material package delivered with the device. |
|
3 |
Two DC power input ports
NOTE:
The following external power module can be configured: |
4 |
PoE DIP switch
NOTICE:
|
|
5 |
Ground screw
NOTE:
It is used with a ground cable. |
6 |
One RST button
NOTICE:
|
|
7 |
Eight 10/100/1000BASE-T PoE+ ports |
8 |
Two 100/1000BASE-X ports |
|
9 |
Two 10GE SFP+ ports |
- |
- |
Ports
Figure 4-56 Typical connections of the DI port
Figure 4-57 Typical connections of the DO port
Table 4-141 Ports on the S210I-8P4SX
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10/100/1000BASE-T port | RJ45 | A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s. | |
| 1000BASE-X port | SFP | A 1000BASE-X port can send and receive data at 1000 Mbit/s or 100 Mbit/s. | |
| 10GE SFP+ optical port | SFP+ | A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. | |
| DI port | 1x5-Pin Phoenix Connector |
The DI port is used to check active level signals. Signal type: 9.6 V to 60 V for state 1; –30 V to +3 V for state 0 |
|
| DO port | 1x5-Pin Phoenix Connector |
The DO port outputs signals so that the connected device can take corresponding actions. Signal type: Passive DO signals, Boolean value (short circuit and open circuit) |
Indicators and Buttons
Figure 4-58 Indicators on the device
Table 4-142 Description of indicators on the device
|
No. |
Indicator |
Name |
Color |
Status |
Description |
|---|---|---|---|---|---|
|
1 |
PWR1 |
Indicator of power module 1 |
- |
Steady off |
Power module 1 is not supplying power or is abnormal. |
|
Green |
Steady on |
Power module 1 supplies power properly. |
|||
|
2
|
PWR2
|
Indicator of power module 2 |
- |
Steady off |
Power module 2 is not supplying power or is abnormal. |
|
Green |
Steady on |
Power module 2 supplies power properly. |
|||
|
3 |
SYS |
System status indicator |
- |
Off |
The system is not running. |
|
Green |
Fast blinking |
The system is starting. |
|||
|
Green |
Steady on |
During the system startup preparation phase, the SYS indicator is steady green, which lasts for a maximum of 30 seconds. |
|||
|
Green |
Slow blinking |
The system is running normally. |
|||
|
4 |
ALM |
Alarm indicator |
Red |
Steady on |
The system is faulty or a temperature alarm has been generated. |
|
- |
Steady off |
The system is normal. |
|||
|
5 |
1 to 8 |
Electrical port indicator (one indicator for each port) |
Arrowheads show the positions of ports. A down arrowhead indicates a port at the bottom, and an up arrowhead indicates a port at the top. |
Meanings of service port indicators vary in different modes. For details, see Table 4-143. |
|
|
6 |
9 and 10 1 and 2 |
Optical port indicator (one indicator for each port) |
- |
||
|
7 |
CLOUD |
Cloud indicator |
- |
Off |
The device is not connected to the cloud. |
|
Blue |
Fast blinking |
The device is connecting to the cloud. |
|||
|
Blue |
Slow blinking |
The device is in the cloud management state. |
|||
Table 4-143 Description of service port indicators in different modes (one indicator for each port)
|
Display Mode |
Color |
Status |
Description |
|---|---|---|---|
|
Default mode |
- |
Steady off |
The port is not connected or has been shut down. |
|
Green |
Steady on |
A link has been established on the port. |
|
|
Green |
Blinking |
The port is sending or receiving data. |
|
|
PoE connection status indicator mode
NOTE:
You need to set DIP switch 2 to ON. In this case, the device works in PoE mode, and the service port indicators show the PoE status of each port. |
- |
Steady off |
The port is not providing power to a powered device (PD). |
|
Green |
Steady on |
The port is providing power to a PD. |
|
|
Green |
Blinking |
The PD connected to the port is not an IEEE-compliant PD or its power exceeds the maximum power or power threshold of the port. |
Power Supply System
The device can use a single power module or dual power modules for 1+1 power redundancy. It can be connected to a PAC240S56-CN power module.
Table 4-144 Power supply configurations
|
Power Module 1 |
Power Module 2 |
Available PoE Power |
Maximum Number of Ports (Fully Loaded) |
|---|---|---|---|
|
PAC240S56-CN |
- |
210 W |
|
|
PAC240S56-CN |
PAC240S56-CN |
240 W |
|
- The PoE power supply of the device is in direct mode. The input voltage must meet the PoE standard. If the input voltage does not meet the PoE standard, the voltage on the PD side may be too low.
- If the PAC240S56-CN is used, one PAC240S56-CN can supply power to only one S210I-8P4SX at a time.
Heat Dissipation System
The device has no fans and uses natural heat dissipation.
Technical Specifications
Table 4-145 Technical specifications of the S210I-8P4SX
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] |
Basic dimensions (excluding the parts protruding from the body): 150.0 mm x 44.0 mm x 133.0 mm (5.91 in. x 1.73 in. x 5.24 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 162.0 mm x 44.0 mm x 142.0 mm (6.38 in. x 1.73 in. x 5.59 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 113.0 mm x 235.0 mm x 188.0 mm (4.45 in. x 9.25 in. x 7.40 in.) |
| Chassis height [U] | 3.65 U |
| Chassis material | Metal |
| Weight without packaging [kg(lb)] | 0.986 kg (2.17 lb) |
| Weight with packaging [kg(lb)] | 1.35 kg (2.98 lb) |
| Typical power consumption [W] | 15.56 W |
| Typical heat dissipation [BTU/hour] | 53.09 BTU/hour |
| Maximum power consumption [W] |
|
| Maximum heat dissipation [BTU/hour] |
|
| Static power consumption [W] | 9.52 W |
| MTBF [years] | 133.599 years |
| Availability | > 0.99999 |
| Noise at normal temperature (acoustic power) [dB(A)] | Noise-free (no fans) |
| Noise at normal temperature (acoustic pressure) [dB(A)] | Noise-free (no fans) |
| Number of card slots | 0 |
| Number of power slots | 0 |
| Number of fans modules | 0 |
| Redundant power supply | 1+1 |
| Long-term operating temperature [°C(°F)] |
0–1800 m (0–5906 ft.) altitude, industrial optical modules:
|
| Restriction on the operating temperature variation rate [°C(°F)] | When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
| Storage temperature [°C(°F)] | -40°C to +85°C (-40°F to +185°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH, non-condensing |
| Long-term operating altitude [m(ft.)] | 0–5000 m (0–16404 ft.) |
| Storage altitude [m(ft.)] | 0-5000 m (0-16404 ft.) |
| Power supply mode | DC external |
| Rated input voltage [V] | DC input: 56 V DC |
| Input voltage range [V] |
DC input: 54 V DC to 57 V DC (PoE/PoE+) 48 V DC (PoE) |
| Maximum input current [A] | 5.6 A |
| Flash memory | Physical space: 16 MB |
| Eth Management port | Not supported |
| USB | Not supported |
| RTC | Not supported |
| RPS input | Not supported |
| Service port surge protection [kV] | Common mode: ±6 kV |
| Power supply surge protection [kV] | DC power: ±2 kV in common mode and ±1 kV in differential mode |
| Ingress protection level (dustproof/waterproof) | IP40 |
| Types of fans | None |
| Heat dissipation mode | Natural heat dissipation |
| Airflow direction | - |
| PoE | Supported |
| Certification |
EMC certification Safety certification Manufacturing certification |
Huawei
بواسطة
Huawei
S210I-8P4SX
- السعر العادي
- $180.00
- سعر البيع
- $180.00
- السعر العادي
-
يتم احتساب تكلفة الشحن عند إتمام عملية الشراء.
إنتهى من المخزن
تفاصيل أساسية حول ميزات المنتج وكيفية استخدامه.
تفاصيل أساسية حول ميزات المنتج وكيفية استخدامه.
تعذر تحميل معلومات توفر الاستلام
ملاحظة المنتج
يرجى التحقق من مواصفات المنتج (الحجم والتوافق والطراز) بعناية قبل الشراء.
اطلع على هذه المنتجات ذات الصلة
كيفية