Ji dor

Fêr bibe ka çi vê hilberê bêhempa dike û çima ew ji bo we guncan e.
Port Connector Type Description Available Components
2.5GE/PoE_IN RJ45 100M/1000M/2.5G auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input.

Network cable
GE0 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
GE1 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
GE2 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
GE3 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
DC 12V DC connector Connects to a 12 V power adapter.

12 V DC power adapter
USB USB Type A Provides 2.5 W or 5 W power supply. -
PASS-THRU RJ45 A pair of RJ45 passthrough ports for transparent transmission and interconnection with Ethernet cables or telephone lines.

Network cable or telephone line
Management console port Pin row Management console port, allowing operations only by professionals -

Indicators and Buttons

Figure 5-3 Indicators and buttons on the AP271E

The indicator is located inside the panel, which turns on after the AP is powered on.

1

Indicator

2

Default
Table 5-3 Indicators on the AP271E
Silkscreen Name Color Status Description
- System indicator - Off The system is not running.
Green Steady on
  • The system is just powered on.
  • The system is starting after a reset.
  • The upper-layer system is starting.
Green Steady on after blinking once After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the system starts.
Green Slow blinking (0.5 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
Green Slow blinking (0.2 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
Green Blinking once every 0.25s (4 Hz)

The AP works in Fat or Fit mode.

  • The software is being upgraded.
  • In Fit mode, the AP is requesting to go online or fails to go online.
Blue Slow blinking (0.5 Hz) The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
Blue Blinking once every 0.25s (4 Hz) The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
Yellow (blinking red and green at the same time, causing color deviation) Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported in V600R024C10.
Red Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported in V600R25C00 or later.
Red Steady on The system is faulty.
Table 5-4 Buttons on the AP271E
Silkscreen Name Description
Default Reset button
  • For V600R024C10: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow fast (blinking red and green at the same time, causing color deviation), at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts.
  • For V600R025C00 and later versions: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks red fast, at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts.

Technical Specifications

Table 5-5 Technical specifications of the AP271E
Item Specification
Installation Type
  • Wall
  • Ceiling
  • Junction Box (86 mm/1-Gang 120 mm/Octagonal)
Dimensions without packaging (H x W x D) [mm(in.)] 175 mm x 86 mm x 45 mm (6.89 in. x 3.39 in. x 1.77 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 72 mm x 245 mm x 118 mm (2.83 in. x 9.65 in. x 4.65 in.)
Weight without packaging [kg(lb)] 0.405 kg (0.89 lb)
Weight with packaging [kg(lb)] 0.65 kg (1.43 lb)
Storage NAND Flash 256 MB
Console port None
Maximum power consumption [W] 13.2 (excluding USB)
Maximum heat dissipation [BTU/hour] 42.8 BTU/hour
Power supply mode
  • PoE
  • DC power adapter
Rated input voltage [V]

DC: 12 V

PoE: 802.3at/af
Input voltage range [V]

DC: 12 V ± 10%

PoE: 802.3at/af
Service port surge protection

PoE port:

Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B

Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
PoE OUT Not supported
Maximum number of physical ports on the entire device

GE (RJ45) x 4, 10M/100M/1000M auto-sensing

2.5GE (RJ45) x 1, 100M/1000M/2500M auto-sensing

PASS-THRU (RJ45) x 2
Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] –60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa] 53kPa - 106kPa ETSI 300 019-2-3
Ground Floating ground
USB USB 2.0, power supply: 2.5 W/5 W
IoT slot Not supported
BLE Not supported
Radio number 2
Operating frequency band
  • 2.4GHz
  • 5GHz
MIMO spatial streams

Radio 0 (2.4 GHz): 2x2

Radio 1 (5 GHz): 2x2
Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax/be

5 GHz: 802.11a/n/ac/ac Wave 2/ax/be
Radio interface Built-in smart antennas
Antenna gain

2.4 GHz:

5 dBi/chain (peak gain)

3 dBi (combined gain)

5 GHz:

5 dBi/chain (peak gain)

3 dBi (combined gain)
Maximum transmit power

2.4 GHz:

20 dBm/chain

23 dBm (combined power)

5 GHz:

20 dBm/chain

23 dBm (combined power)
Single radio transmit power [dBm]

2.4G: -10 dBm to 20 dBm/chain

5G: -10 dBm to 20 dBm/chain
MTBF [year] 157.6381617 year
MTTR [hour] 2 hour
Frequency stability [ppm] +/-20
802.3bt power supply description The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3at power supply description The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3af power supply description When the power supply mode is negotiated to 802.3af, the USB power supply is not supported and other functions are not restricted.
DC power supply description No function is limited.
Fêr bibe ka çi vê hilberê bêhempa dike û çima ew ji bo we guncan e.
Port Connector Type Description Available Components
2.5GE/PoE_IN RJ45 100M/1000M/2.5G auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input.

Network cable
GE0 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
GE1 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
GE2 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
GE3 RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing and connects to the wired Ethernet.

Network cable
DC 12V DC connector Connects to a 12 V power adapter.

12 V DC power adapter
USB USB Type A Provides 2.5 W or 5 W power supply. -
PASS-THRU RJ45 A pair of RJ45 passthrough ports for transparent transmission and interconnection with Ethernet cables or telephone lines.

Network cable or telephone line
Management console port Pin row Management console port, allowing operations only by professionals -

Indicators and Buttons

Figure 5-3 Indicators and buttons on the AP271E

The indicator is located inside the panel, which turns on after the AP is powered on.

1

Indicator

2

Default
Table 5-3 Indicators on the AP271E
Silkscreen Name Color Status Description
- System indicator - Off The system is not running.
Green Steady on
  • The system is just powered on.
  • The system is starting after a reset.
  • The upper-layer system is starting.
Green Steady on after blinking once After the hardware reset is cleared and the software starts, the indicator blinks once. Then, the indicator is steady on until the system starts.
Green Slow blinking (0.5 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
Green Slow blinking (0.2 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
Green Blinking once every 0.25s (4 Hz)

The AP works in Fat or Fit mode.

  • The software is being upgraded.
  • In Fit mode, the AP is requesting to go online or fails to go online.
Blue Slow blinking (0.5 Hz) The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
Blue Blinking once every 0.25s (4 Hz) The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
Yellow (blinking red and green at the same time, causing color deviation) Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported in V600R024C10.
Red Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported in V600R25C00 or later.
Red Steady on The system is faulty.
Table 5-4 Buttons on the AP271E
Silkscreen Name Description
Default Reset button
  • For V600R024C10: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow fast (blinking red and green at the same time, causing color deviation), at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts.
  • For V600R025C00 and later versions: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks red fast, at which point you can release the button. Then the device restores the factory settings, switches to the Fit mode, and restarts.

Technical Specifications

Table 5-5 Technical specifications of the AP271E
Item Specification
Installation Type
  • Wall
  • Ceiling
  • Junction Box (86 mm/1-Gang 120 mm/Octagonal)
Dimensions without packaging (H x W x D) [mm(in.)] 175 mm x 86 mm x 45 mm (6.89 in. x 3.39 in. x 1.77 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 72 mm x 245 mm x 118 mm (2.83 in. x 9.65 in. x 4.65 in.)
Weight without packaging [kg(lb)] 0.405 kg (0.89 lb)
Weight with packaging [kg(lb)] 0.65 kg (1.43 lb)
Storage NAND Flash 256 MB
Console port None
Maximum power consumption [W] 13.2 (excluding USB)
Maximum heat dissipation [BTU/hour] 42.8 BTU/hour
Power supply mode
  • PoE
  • DC power adapter
Rated input voltage [V]

DC: 12 V

PoE: 802.3at/af
Input voltage range [V]

DC: 12 V ± 10%

PoE: 802.3at/af
Service port surge protection

PoE port:

Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B

Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B
PoE OUT Not supported
Maximum number of physical ports on the entire device

GE (RJ45) x 4, 10M/100M/1000M auto-sensing

2.5GE (RJ45) x 1, 100M/1000M/2500M auto-sensing

PASS-THRU (RJ45) x 2
Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] –60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa] 53kPa - 106kPa ETSI 300 019-2-3
Ground Floating ground
USB USB 2.0, power supply: 2.5 W/5 W
IoT slot Not supported
BLE Not supported
Radio number 2
Operating frequency band
  • 2.4GHz
  • 5GHz
MIMO spatial streams

Radio 0 (2.4 GHz): 2x2

Radio 1 (5 GHz): 2x2
Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax/be

5 GHz: 802.11a/n/ac/ac Wave 2/ax/be
Radio interface Built-in smart antennas
Antenna gain

2.4 GHz:

5 dBi/chain (peak gain)

3 dBi (combined gain)

5 GHz:

5 dBi/chain (peak gain)

3 dBi (combined gain)
Maximum transmit power

2.4 GHz:

20 dBm/chain

23 dBm (combined power)

5 GHz:

20 dBm/chain

23 dBm (combined power)
Single radio transmit power [dBm]

2.4G: -10 dBm to 20 dBm/chain

5G: -10 dBm to 20 dBm/chain
MTBF [year] 157.6381617 year
MTTR [hour] 2 hour
Frequency stability [ppm] +/-20
802.3bt power supply description The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3at power supply description The power supply mode is negotiated to 802.3at, and no function is restricted.
802.3af power supply description When the power supply mode is negotiated to 802.3af, the USB power supply is not supported and other functions are not restricted.
DC power supply description No function is limited.
Kirîna Zîrek Li vir Dest Pê Dike
Berhemên bi kalîte bi bihayên maqûl kifş b...  Zêdetir bixwîne
Huawei by Huawei

AP271E

$110.00
$110.00
Mesrefa şandinê di qonaxa dawî ya kirînê de tê hesabkirin.
Balkeş nîne
Agahiyên girîng ên li ser taybetmendî û bikaranîna berhemê.
Agahiyên girîng ên li ser taybetmendî û bikaranîna berhemê.
Têbînîya Berhemê
Ji kerema xwe berî kirînê taybetmendiyên hilberê (mezinahî, lihevhatî û model) bi baldarî kontrol bikin.

Van Berhemên Têkildar Binêre

Çawa

Gotarên Dawî