Ji dor

Fêr bibe ka çi vê hilberê bêhempa dike û çima ew ji bo we guncan e.

Overview

Table 4-36 Basic information about the AP362E
Item Details
Description AP362E(11ax indoor,2+2 dual-band,smart antenna)
Part Number 50087148
Model AP362E
First supported version V200R024C00

Appearance

Figure 4-22 Appearance of the AP362E

Indicators and Buttons

Figure 4-23 Indicators and buttons on the AP362E
Table 4-37 Indicators on the AP362E
Silkscreen Name Color Status Description
- System indicator Green Steady on The AP is just powered on and the software is not started yet.
Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green.
Green Slow blinking (0.5 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
Green Slow blinking (0.2 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
Green Blinking once every 0.25s (4 Hz)

The AP works in Fat or Fit mode.

  • The software is being upgraded.
  • In Fit mode, the AP is requesting to go online or fails to go online.
Blue Slow blinking (0.5 Hz) The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
Blue Blinking once every 0.25s (4 Hz) The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
Yellow (blinking red and green at the same time, causing color deviation) Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported only in V200R024C00 and V200R024C10.
Red Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported in V200R25C00 or later.
Red Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.
Table 4-38 Buttons on the AP362E
Silkscreen Name Description
Default Reset button
  • For V200R024C00 and V200R024C10: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow fast (blinking red and green at the same time, causing color deviation), at which point you can release the button. Then the device restores the factory settings, switches to the cloud mode, and restarts.
  • For V200R025C00 and later versions: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks red fast, at which point you can release the button. Then the device restores the factory settings, switches to the cloud mode, and restarts.

Ports

Figure 4-24 Ports on the AP362E
Table 4-39 Ports on the AP362E
Port Connector Type Description Available Components
GE0/PoE_IN RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing, connects to the wired Ethernet, and supports PoE input.

Network cable

Technical Specifications

Table 4-40 Technical specifications of the AP362E
Item Specification
Installation Type
  • Wall
  • Ceiling (Solid Wall/Gypsum Board/Spring Tee/Flat-Edge T-Rail/Channel Rail/Beam/Threaded Rod)
Dimensions without packaging (H x W x D) [mm(in.)] Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 200 mm x 231 mm x 61 mm (7.87 in. x 9.09 in. x 2.40 in.)
Weight without packaging [kg(lb)] 0.45 kg (0.99 lb)
Weight with packaging [kg(lb)] 0.75 kg (1.65 lb)
Storage NAND Flash 256 MB
Console port None
Maximum power consumption [W] 12.3 W
Maximum heat dissipation [BTU/hour] 39.9 BTU/hour
Power supply mode PoE
Rated input voltage [V] NA
Input voltage range [V] PoE: 802.3af
Service port surge protection

PoE port:

Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B

Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
PoE OUT Not supported
Maximum number of physical ports on the entire device GE (RJ45) x 1, 10M/100M/1000M auto-sensing
Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] –60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa] 53kPa - 106kPa ETSI 300 019-2-3
Ground Floating ground
USB Not supported
IoT slot Not supported
BLE Not supported
Radio number 2
Operating frequency band
  • 2.4GHz
  • 5GHz
MIMO spatial streams

Radio 0 (2.4 GHz): 2x2

Radio 1 (5 GHz): 2x2
Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax
Radio interface Built-in smart antennas
Antenna gain

2.4G:

4 dBi/chain (peak)

2 dBi (combined gain)

5G:

5 dBi/chain (peak value)

3 dBi (combined gain)
Maximum transmit power

2.4G:

20 dBm/chain

23 dBm (combined power)

5G:

20 dBm/chain

23 dBm (combined power)
Single radio transmit power [dBm]

2.4G: 0 dBm to 20 dBm/chain

5G: 0 dBm to 20 dBm/chain
MTBF [year] 440.3 year
MTTR [hour] 2 hour
Frequency stability [ppm] +/-20
802.3bt power supply description The negotiated power supply mode is 802.3af, and no function is restricted.
802.3at power supply description The negotiated power supply mode is 802.3af, and no function is restricted.
802.3af power supply description The negotiated power supply mode is 802.3af, and no function is restricted.
DC power supply description Not supported
Fêr bibe ka çi vê hilberê bêhempa dike û çima ew ji bo we guncan e.

Overview

Table 4-36 Basic information about the AP362E
Item Details
Description AP362E(11ax indoor,2+2 dual-band,smart antenna)
Part Number 50087148
Model AP362E
First supported version V200R024C00

Appearance

Figure 4-22 Appearance of the AP362E

Indicators and Buttons

Figure 4-23 Indicators and buttons on the AP362E
Table 4-37 Indicators on the AP362E
Silkscreen Name Color Status Description
- System indicator Green Steady on The AP is just powered on and the software is not started yet.
Green Steady on after blinking once After the system is reset and starts uploading the software, the indicator blinks green once. Until the software is uploaded and started, the indicator remains steady green.
Green Slow blinking (0.5 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and STAs are associated with the AP.
Green Slow blinking (0.2 Hz) The AP runs in Fat or Fit mode, the Ethernet connection is normal, and no STA is associated with the AP.
Green Blinking once every 0.25s (4 Hz)

The AP works in Fat or Fit mode.

  • The software is being upgraded.
  • In Fit mode, the AP is requesting to go online or fails to go online.
Blue Slow blinking (0.5 Hz) The AP works in cloud mode, has gone online on the cloud management controller, and is running properly.
Blue Blinking once every 0.25s (4 Hz) The AP works in cloud mode and is connecting to the cloud management controller (including reconnection after disconnection).
Yellow (blinking red and green at the same time, causing color deviation) Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported only in V200R024C00 and V200R024C10.
Red Blinking once every 0.25s (4 Hz)

Hold down the Default button for more than 6 seconds to restore the factory settings.

This function is supported in V200R25C00 or later.
Red Steady on A fault that affects services has occurred, such as a DRAM detection failure or system software loading failure. The fault cannot be automatically rectified and must be rectified manually.
Table 4-38 Buttons on the AP362E
Silkscreen Name Description
Default Reset button
  • For V200R024C00 and V200R024C10: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks yellow fast (blinking red and green at the same time, causing color deviation), at which point you can release the button. Then the device restores the factory settings, switches to the cloud mode, and restarts.
  • For V200R025C00 and later versions: If you press the button, the device resets. If you hold down the button for more than 6 seconds, the indicator blinks red fast, at which point you can release the button. Then the device restores the factory settings, switches to the cloud mode, and restarts.

Ports

Figure 4-24 Ports on the AP362E
Table 4-39 Ports on the AP362E
Port Connector Type Description Available Components
GE0/PoE_IN RJ45 Ethernet electrical port that supports 10M/100M/1000M auto-sensing, connects to the wired Ethernet, and supports PoE input.

Network cable

Technical Specifications

Table 4-40 Technical specifications of the AP362E
Item Specification
Installation Type
  • Wall
  • Ceiling (Solid Wall/Gypsum Board/Spring Tee/Flat-Edge T-Rail/Channel Rail/Beam/Threaded Rod)
Dimensions without packaging (H x W x D) [mm(in.)] Diameter x depth: 180 mm x 35 mm (7.09 in. x 1.38 in.)
Dimensions with packaging (H x W x D) [mm(in.)] 200 mm x 231 mm x 61 mm (7.87 in. x 9.09 in. x 2.40 in.)
Weight without packaging [kg(lb)] 0.45 kg (0.99 lb)
Weight with packaging [kg(lb)] 0.75 kg (1.65 lb)
Storage NAND Flash 256 MB
Console port None
Maximum power consumption [W] 12.3 W
Maximum heat dissipation [BTU/hour] 39.9 BTU/hour
Power supply mode PoE
Rated input voltage [V] NA
Input voltage range [V] PoE: 802.3af
Service port surge protection

PoE port:

Common mode (8 wires to ground): 4 kV (1.2/50 us, 42 ohms), criterion B

Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B
PoE OUT Not supported
Maximum number of physical ports on the entire device GE (RJ45) x 1, 10M/100M/1000M auto-sensing
Long-term operating temperature [°C(°F)] 0°C to 40°C (32°F to 104°F) (From 1800 m to 5000 m [5905.51 ft. to 16404.20 ft.], the maximum ambient temperature decreases by 1°C [1.8°F] for every 300 m [984.25 ft.] increase in altitude.)
Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F)
Long-term operating relative humidity [RH] 5% RH to 95% RH, non-condensing
Long-term operating altitude [m(ft.)] –60 m to +5000 m (–196.85 ft to +16404.20 ft)
Atmospheric pressure [kPa] 53kPa - 106kPa ETSI 300 019-2-3
Ground Floating ground
USB Not supported
IoT slot Not supported
BLE Not supported
Radio number 2
Operating frequency band
  • 2.4GHz
  • 5GHz
MIMO spatial streams

Radio 0 (2.4 GHz): 2x2

Radio 1 (5 GHz): 2x2
Wi-Fi standard

2.4 GHz: 802.11b/g/n/ax

5 GHz: 802.11a/n/ac/ac Wave 2/ax
Radio interface Built-in smart antennas
Antenna gain

2.4G:

4 dBi/chain (peak)

2 dBi (combined gain)

5G:

5 dBi/chain (peak value)

3 dBi (combined gain)
Maximum transmit power

2.4G:

20 dBm/chain

23 dBm (combined power)

5G:

20 dBm/chain

23 dBm (combined power)
Single radio transmit power [dBm]

2.4G: 0 dBm to 20 dBm/chain

5G: 0 dBm to 20 dBm/chain
MTBF [year] 440.3 year
MTTR [hour] 2 hour
Frequency stability [ppm] +/-20
802.3bt power supply description The negotiated power supply mode is 802.3af, and no function is restricted.
802.3at power supply description The negotiated power supply mode is 802.3af, and no function is restricted.
802.3af power supply description The negotiated power supply mode is 802.3af, and no function is restricted.
DC power supply description Not supported
Kirîna Zîrek Li vir Dest Pê Dike
Berhemên bi kalîte bi bihayên maqûl kifş b...  Zêdetir bixwîne
Huawei by Huawei

AP362E

$0.00
$0.00
Mesrefa şandinê di qonaxa dawî ya kirînê de tê hesabkirin.
Balkeş nîne
Agahiyên girîng ên li ser taybetmendî û bikaranîna berhemê.
Agahiyên girîng ên li ser taybetmendî û bikaranîna berhemê.
Têbînîya Berhemê
Ji kerema xwe berî kirînê taybetmendiyên hilberê (mezinahî, lihevhatî û model) bi baldarî kontrol bikin.

Van Berhemên Têkildar Binêre

Çawa

Gotarên Dawî